AirCurve™ 10S with HumidAir™

Specifications

Weight:

• Machine with Water Chamber: 2.75 lbs (44 oz.)
• Standard Chamber: .54 lb
• Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
• Travel Bag Alone: 1.18 lb
• Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; Travel Bag: Approximately 5.25 lbs
• 90W Power Supply, Cord and Plug: 1.29 lb

Dimensions:

• Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
• Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
•  Travel Bag: 13.24 in L x 10 in W x 5 in 
• 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in

Water Chamber Capacity: 380 mL

AC Input Range – 90W Power Supply: 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II

DC Output – 90 W Power Supply: 24V — 3.75A

Typical Power Consumption: 53W (57VA)

Peak Power Consumption: 104W (108VA)

Operating Pressure: 4 – 20 cm H2O

Length – ClimateLineAir Tubing: 6 feet

Materials:

• ClimateLineAir Tubing: Flexible Plastic
• Materials – Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
• Materials – Standard Filter: Polyester non-woven fiber

Operating Temperature: 41° F – 95° F (5° C – 35° C)

Storage and Transport Temperature: -4° F – 140° F (-20° C – 60° C)

Operating Humidity: 10% – 95% Relative Humidity, non-condensing

Storage and Transport Humidity: 5% – 95% relative Humidity, non-condensing

Operating Altitude: Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa

Maximum Temperature:

• Heating Plate: 154° F (68° C)
• Maximum Temperature – Cut Out: 165° F (74° C)
• Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)

IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22

Manufacturer’s Warranty: 2 Years

Patient Weight: Greater than 66 lbs

Benefits

• 

  The quiet Easy-Breathe™ motor makes for a peaceful environment for the patient and their bed partner.

  Expiratory pressure relief (EPR™) maintains the optimal treatment for the patient during inhalation and reduces pressure during exhalation.

  SmartStart™ allows the patient to start therapy by breathing in, instead of pressing the ‘Start’ button.

  Pulse oximetry monitoring is available.

  Integrated humidification simplifies setting up the device and makes therapy easier.

  Using AirView™, you can access nightly therapy data, including:

  • Usage Data
  • Events Per Hour
  • Average Usage
  • Leak Rate
  • AHI

  Troubleshoot remotely (using the remote assist feature) your care provider can change device settings remotely, such as pressure settings and humidification.

  The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings, including:

  • Ramp time – Ease into therapy with a period of lower pressure. Or select AutoRamp™ and the machine senses when sleep begins.
  • Humidity Level – Set humidity between 1 (lowest) & 8 (highest), or turn it off.
  • Mask Fit – Runs a seal integrity check showing green smiling face or red frowning face.
  • Pressure Relief – Eases the pressure when exhaling
  • SmartStart™ – Therapy automatically starts when it senses breathing
  • Mask Type – Set mask type being used: Nasal; Nasal Pillow; Full Face Mask
  • Run Warmup – Preheat the humidifier water before starting therapy

  Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.

Helpful Videos

How humidification makes CPAP therapy more comfortable

What to expect on ResMed sleep apnea treatment